Robot Store (HK) -- RobotCraft robot series, robot Mammals, robot animals, robot fighters, robot insect

RobotCraft Robot Series (Robot Mammals)

RR-71114 -- Mechanical Blowfish (Tail Fin Swimming Action ) -- US$26.95

The latest release in the Robocraft Series is our first water based Robocraft, the Mechanical Blowfish. With a comical inflated design, this cute little blowfish is loads of fun to build, loads of fun to play with, and educational too! The Mechanical Blowfish is propelled forward by a left-right moving tail fin rotated by a crank and link rod. The rounded body gives the Blowfish a unique look different to the flat design of previous Robocraft pieces.

· Overall length: 197mm, overall height: 81mm

· Comprised of mainly transparent plastic allowing internal mechanics to be displayed after assembly and during use.

· Easy screw assembly and wiring.

· Includes Type 130 motor with low gear ratio (58.2:1) for controlled propulsion.

RR-71111 -- Mechanical Pig (Shakes Head While Walking) -- US$17.95

Shakes Head While Walking

Introducing the latest addition to the popular Robocraft Series, the Mechanical Pig with shaking head action. Pig's body and head parts have been molded with pink semi-transparent plastic, giving the pig a futuristic look. Assembly is very simple with use of screws and snap-lock parts.

Basic Specifications

· Total length: 135mm

· Total weight: 95g (w/ out batteries)

· Body material: ABS resin Gearbox, motor and reverse switch included.

· Comes with a small flag that can be attached on the back of the pig.

· A screwdriver for assembly is provided.

· Requires one R04/AAA/UM4 battery (sold separately).

· Continuous running time with Alkaline battery, 1 hour.

Walking the Pig

Run on flat, smooth surfaces. Avoid running over slopes, on bumpy roads or on thick carpet.

RR-71112 -- Mechanical Racehorse (Galloping Type) -- US$17.95

They're off and racing!

The latest and fastest release in the Robocraft Series, this galloping racehorse with jockey is loads of fun to build, loads of fun to play with, and educational too! Employing left and right legs moving at the same time, the legs and wheel base have been designed for stability and faster running. Overall this galloping racehorse can run 1.3 times faster than the mechanical rabbit.

Low speed, high speed

Power from the rotating motor is transferred to the legs via link rods to make the horse gallop. Two link rod holes on the back legs allow you to choose between two running styles.

Easy assembly

Assembly is very simple with use of screws and snap-lock parts. Cable ends are rubber capped with cut areas pre-marked for easy wiring.

3 types of stickers

The mechanical horse is comprised of mainly transparent orange plastic allowing internal mechanics to be easily seen. Kit includes 3 types of stickers for representation of horse's mask and number, and jockey's clothes to make each model easily distinguishable while racing with friends.

Basic Specifications

· Total length: 193mm

· Total height: 95mm

· Body material: ABS resin

· Gearbox, motor, reverse switch also included.

· Stickers for horse's mask and number, and jockey's clothes are included.

· Requires one R6/AA/UM3 battery. (sold separately)

· Continuous running time with alkaline battery: 1.5hrs.

How to play

Run on flat, smooth surfaces. Avoid running over slopes, on bumpy roads or on thick carpet.

RR-71103 -- Mechanical Beetle (Obstacle Evading Type) -- US$17.95

Walks While Swinging its Horn to Avoid Obstacles. This amazing beetle-robot walks with its four legs while swinging its horn. When it bumps into an obstacle, it turns around automatically and will continue walking. Horn, legs and body on which the gearbox is mounted employ transparent-colored parts, giving the beetle a funky look. Reverse switch is also transparent, giving you a peek at the beetle's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.

Specifications:

Total length: 195mm
Total weight: 110g (w/ out batteries)
Body material: ABS resin
2 possible different speeds
Gearbox, motor, reverse switch also included
Requires one AA battery (sold separately)
Continuous running time with Alkaline battery: 3hrs. at low speed/1hr. at high speed.

RR-71117 – Sliding Ladybug (Vibrating action) -- US$9.95

Information

Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement.

Easy assembly using snap-on parts and screws.

Powered by a Type 130 motor.

Direction can be easily altered by changing the direction of the rods.

Speed can be adjusted by changing the angle of the rods.

Body shape designed to represent various popular animals whilst maintaining a curved form to move around obstacles.

Eyes act as rollers also helping model to smoothly work around obstacles.

Games and races can be easily made by building an obstacle course using cardboard etc.

Best performance on smooth flat surfaces.

Requires 1 R1/AAA/UM4 battery (sold separately)

Overall length: 95mm

RR-71116 – Sliding Fox (Vibrating action) -- US$9.95

Information

Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement.

Easy assembly using snap-on parts and screws.

Powered by a Type 130 motor.

Direction can be easily altered by changing the direction of the rods.

Speed can be adjusted by changing the angle of the rods.

Body shape designed to represent various popular animals whilst maintaining a curved form to move around obstacles.

Eyes act as rollers also helping model to smoothly work around obstacles.

Games and races can be easily made by building an obstacle course using cardboard etc.

Best performance on smooth flat surfaces.

Requires 1 R1/AAA/UM4 battery (sold separately)

Overall length: 120mm

RR-71115 – Sliding Mouse (Vibrating action) -- US$9.95

Information

Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement.

Easy assembly using snap-on parts and screws.

Powered by a Type 130 motor.

Direction can be easily altered by changing the direction of the rods.

Speed can be adjusted by changing the angle of the rods.

Body shape designed to represent various popular animals whilst maintaining a curved form to move around obstacles.

Eyes act as rollers also helping model to smoothly work around obstacles.

Games and races can be easily made by building an obstacle course using cardboard etc.

Best performance on smooth flat surfaces.

Requires 1 R1/AAA/UM4 battery (sold separately)

Overall length: 97mm

RR-71102 -- Mechanical Kangaroo (Two-leg Jumping Type) -- US$17.95

The Beloved Kangaroo from Australia. We present the robot replica of the beloved kangaroo from Australia. This amazing kangaroo-robot jumps by moving its rear legs simultaneously to go forward. When walking slowly, it also uses its front legs (just like they do down under) and when running quickly, it uses its tail for balance. Legs and body on which the gearbox is mounted employ transparent-colored parts, giving the kangaroo a funky look. Reverse switch is also transparent, giving you a peek at the kangaroo's internal mechanisms.

Specifications:

Total length: 180mm
Total weight: 95g (w/ out batteries)
Body material: ABS resin
2 gears included, one for high speed and one for low speed. Motor and reverse switch also included
Screwdriver for assembly is included
Requires one AA battery (sold separately)
Continuous running time with Alkaline battery: 3hrs. at low speed/1hr. at high speed

RR-71101 -- Mechanical Dog (Four-leg Walking Type) -- US$17.95

Introducing the Mechanical Dog. We have at last entered the age of robotics. Welcoming this new era, we present the all-new robocraft series, introducing a line-up of products that feature a variety of form and movement. The first item of the series is a four-legged mechanical dog with various speed controls. The dog walks by transferring motor revolution to reciprocating motion via crank and linkage rod. Main body and legs are made of transparent yellow parts to allow viewing of internal mechanisms. Construction is simple as parts can easily be attached with screws. Wiring has also been made simple.

Specifications:

Total length: 165mm
Total weight: 100g (w/ out batteries)
Body material: ABS resin
2 possible gear ratios coupled with 4 different strides let you choose 8 different speeds
Spring tail also included
Gearbox, motor, reverse switch also included
Requires one AA battery (sold separately)
Continuous running time with Alkaline battery- 2hrs. at low speed/1hr. at high speed

RR-71104 -- Mechanical Ostrict (Two-leg Walking Type) -- US$17.95

Long-Legged Ostrich's Walking Style Realistically Rendered. We present its next Robocraft Series item, the 2-leg walking-type Mechanical Ostrich. Motor rotating power is transferred to the legs via crank plates to make the ostrich walk. Legs and body on which the gearbox is mounted employ transparent-colored parts, giving the ostrich a funky look. Reverse switch is also transparent, giving you a peek at the ostrich's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.

Specifications:

Total length: 135mm
Total weight: 100g (w/ out batteries)
Body material: ABS resin
2 possible different speeds
Gearbox, motor, reverse switch also included
Requires one AA battery (sold separately)
Continuous running time with Alkaline battery, 1.5 hrs.

RR-71105 -- Mechanical Giraffe (Four-leg Walking Type) -- US$17.95

Giraffe's Walking Style Realistically Rendered. We present its next Robocraft Series item, the 4-leg walking-type Mechanical Giraffe. Motor rotating power is transferred to the legs via crank plates to make the Giraffe walk. The long neck and legs, which have been specially molded to replicate the unique motifs of the actual giraffe, and body on which the gearbox is mounted employ transparent-colored parts, giving the giraffe a funky look. Reverse switch is also transparent, giving you a peek at the giraffe's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.

Specifications:

Total length: 190mm
Total weight: 110g (w/ out batteries)
Body material: ABS resin
Gearbox, motor, reverse switch also included
A screwdriver for the assembly is provided
Requires one AA battery (sold separately)
Continuous running time with Alkaline battery, 1.5 hrs.

RR-71106 -- Mechanical Turtle (Crawling Type) -- US$17.95

Four-Leg Crawling Type Mechanical Turtle. We present the 4-leg crawling-type Mechanical Turtle as its next Robocraft Series item. Motor rotating power is transferred to the legs via crank plates to make the Turtle crawl. Each pair of legs (front and rear) are molded as one piece and front leg plate is attached with a ball joint that serves as a fulcrum to realistically imitate turtle crawling. Legs and body on which the gearbox is mounted employ transparent-colored parts, giving the turtle a funky look. Reverse switch is also transparent, giving you a peek at the turtle's internal mechanisms. Assembly is very simple with use of screws and snap-lock parts.

Specifications:

Total length: 166mm
Total weight: 95g (w/ out batteries)
Body material: ABS resin
Gearbox, motor, reverse switch also included
A screwdriver for the assembly is provided
Requires one AAA battery (sold separately)
Continuous running time with Alkaline battery, 1 hrs.

RR-71107 -- Mechanical Insect -- US$29.00

Take control of your insect. Now you can control where your robot will go. Thanks to a 2-channel remote control, you can make your mechanical insect move forward/backward or make it turn to the left and to the right. Everything needed to assemble your model is included. The kit features 2 gearboxes, one for each set of legs. The remote-control circuit is pre-wired to the motor and the gearboxes are pre-assembled to achieve ease of assembly.

Specifications:

Total length: 116mm
Total weight: 135g (w/ out batteries)
Body material: ABS resin
Gearbox, motor, reverse switch also included
A screwdriver for the assembly is provided
Requires two R6/AA/UM3 batteries (sold separately)
Continuous running time with Alkaline battery, 2 hrs.

RR-71108 -- Mechanical Rabbit (Hopping type) -- US$18.00

The fastest robot in the series: the Mechanical Rabbit. Introducing the 8th wonder of the Robocraft series! Get ready, because here comes a super fun to assemble, super fast, super colorful Mechanical Rabbit. Motor rotating power is transferred to the legs via crank plates to make the rabbit hop. The long ears and the rounded face, which have been specially molded, employ semi-transparent parts, giving the rabbit a funky look. Assembly is very simple with use of screws and snap-lock parts.

Specifications:

Total length: 115mm
Total weight: 95g (w/ out batteries)
Body material: ABS resin
Gearbox, motor also included
Includes guides to be attached on both sides to make the mechanical rabbit useable on Mini 4WD circuits.
A screwdriver for the assembly is provided
Requires one R04/AAA/UM4 battery (sold separately)
Continuous running time with Alkaline battery, 40 min.

RR-71109 -- Mechanical Tiger (Four-leg walking type) -- US$18.00

Jungle's King now part of the Robocraft Series. We now present the Mechanical Tiger as its next addition to the Robocraft Series. Power from the rotating motor is transferred to the legs via crank plates to make the tiger walk. Tiger's body parts have been molded with yellow semi-transparent plastic, giving the tiger a futuristic look. Assembly is very simple with use of screws and snap-lock parts.

Specifications:

Total length: 115mm
Total weight: 105g (w/ out batteries)
Body material: ABS resin
Gearbox, motor, and reverse switch included
2 possible gear ratios coupled with 4 different strides let you choose 8 different speeds.
A screwdriver for the assembly is provided.
Requires one R04/AAA/UM4 battery (sold separately)
Continuous running time with Alkaline battery, 2 hrs.

RR-71110 -- Boxing Fighter (1-PC) -- US$29.00

Grab your gloves and start the fight The latest release in the Robocraft Series, this easy to assemble R/C boxer is not only educational but also a lot of fun for kids and adults. The boxing fighter features a twin motor gear box enabling this little boxer to punch while moving backwards, forwards or turning to the left or right. Hitting the face of an opposing fighter enough times will cause them to fall over. You can also adjust the level of each fighter, making it easier or harder for your fighter to be knocked down.

Specifications:

Total length: 141mm (arm extended), 87mm (arm retracted)
Total width: 92mm
Total height: 144mm
Total weight: 160g (w/out remote control)
Body material: ABS resin
Gearbox, motor, remote-control also included.
Motor and electronic circuit come pre-wired.
Kit also comes with practice punch ball.
A screwdriver for assembly is provided.
Requires two R6/AA/UM3 batteries (sold separately).

How to play?
There are many ways to enjoy the remote-control boxing fighter. You can either build a course that the robot should follow in order to reach the target that has to be hit or create a ring with a board or a tile and defeat your opponent by punching them out of the ring. You can also make walls with various blocks and try to destroy it with the boxing fighter as fast as possible. See gallery picture for details.

RR-71113 -- Boxing Fighter Battle Set (2 PCS) -- US$55.95

Match up with friends and family!

The Boxing Fighter now comes as a set of 2. The boxing fighter features a twin motor gear box enabling this little boxer to punch while moving backwards, forwards or turning to the left or right. The Boxing Fighter is also equipped with a judging plate that will allow you to decide who the winner of the fight is. The plate will lower each time you hit your opponent's mouth. When your opponent's plate is completely lowered, you win the fight. You can also adjust the level of each fighter, making it easier or harder for your fighter to be knocked down by fitting one or two stays to the bottom rear of the fighter. Assembly is very simple with use of screws and snap-lock parts. Packaging specially designed to be used as a ring, with a boxing ring printed on the inside.

Choose between a straight punch and upper cut

Through a simple adjustment the type of punch can be changed from an upper cut to a straight jab. You can also combine them for more tactical fights.

Two-stick remote control

The remote-control allows you to control the two gearboxes. Each lever controls one gearbox. In no time, you will be able to make your boxing fighter go anywhere you want.

Includes new stickers

In order to give the Boxing Fighter a more aggressive look, set includes new stickers. Combined with the red and yellow tinted parts these stickers give your Boxing Fighter its very own unique look.

Basic Specifications (for one Boxing Fighter)

Total length: 141mm (arm extended), 87mm (arm retracted)

Total width: 92mm

Total height: 144mm

Total weight: 160g (w/ out remote control)

Body material: ABS resin

Gearbox, motor, remote-control also included.

A screwdriver for assembly is provided.

Requires two R6/AA/UM3 batteries (sold separately) for each Boxing Fighter.

How to play

Hitting your opponent in the mouth will make the judging plate lower. When your opponent's plate is completely lowered, you win the fight.

Educational Discount and Special COMBO Package Available

Comments, Questions, or Orders: info@robotstorehk.com

Last Updated: Feb 15, 2005